ElectraGuard ESD control thin set industrial strength ESD Epoxy, much more than mere ESD paint (and believe me we've tried them all).  ElectraGuard provides TRUE state of the art ESD conductive, long lasting, easy to apply RESULTS via a high performance, thin set, two part water based epoxy / acrylate.

RESULTS = ULTIMATE durability, abrasion resistance and permanent conductive properties.  ElectraGuard; SUPERB resistance to chemicals and solvents. When cured, do the comparison. ElectraGuard is far superior to mere solvent based urethanes and rivals those of  solvent based systems with out the toxicity and disposal considerations associated with typical  epoxy.  Leave "as is" for matt finish or use our ESD Floor finish for high shine.

______________________________________________________________________

SECTION I - IDENTITY

______________________________________________________________________

                                       ElectraGuard ESD Epoxy, HAZARDOUS -  NO

UNITED ESD                   

4878 LAKEVIEW CIR , Colorado City, CO 81019

Telephone Number for Information or Emergency: 719 676 3928 

HEALTH 1,  FLAMMABILITY, 1  REACTIVITY, 0  PERSONAL PROTECTION B

Date Prepared 08/05/05

______________________________________________________________________

SECTION II - HAZARDOUS INGREDIENTS

______________________________________________________________________

          Hazardous Components     PEL    TWA   STEL   Other Limits  %

             CAS Reg#                                    IDLH      (opt)

 2-BUTOXYETHANOL #111-76-2*       50     25     N.A.      700ppm    <10 

 ISOPROPANOL      # 67-63-0       400     400    500    12000ppm    < 6 

*LISTED CHEMICAL SUBJECT TO REPORTING REQUIREMENT OF SCT.313 OF TITLE III.

_______________________________________________________________________

SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS

________________________________________________________________________

  Boiling point          - 210      Specific Gravity(Water=1)          - 1.12

  Vapor Pressure (mm Hg) - 0.6     Melting Point                      - N.A.

  Vapor Density (air=1)  - 2.1     Evaporation Rate(Butyl Acetate=1) -0.3

  Viscosity (CPS)        - 375      Decomposition Temperature         -NA.

  Auto Ignition Temp.    - NA.     Solubility in Water    -COMPLETE            

  pH -  6.5  +/-.5                                                              

  Appearance and Odor  -LIGHT COLORED MILKY LIQUID, GLYCOL ODOR

_______________________________________________________________________________

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

_______________________________________________________________________________

  Flash Point  - TCC 142 F.                 Flammable Limits

                                            LEL - N.A.      UEL - N.A.

  Extinguishing media  - WATER SPRAY                                           

  Fire Fighting Procedure - COOL CONTAINERS WITH WATER                       

  Fire and Explosion Hazards - SLIGHT  _______________________________________________________________________________

SECTION  V - REACTIVITY DATA

_______________________________________________________________________________

  Stability - STABLE        

  Conditions to Avoid - N.A.                           

  Incompatibility - ACIDS, BASES, STRONG OXIDIZERS                           

  Hazardous Decomposition or Byproduct - THERMAL DECOMPOSITION MAY YIELD CARBON MONOXIDE              

  Hazardous Polymerization - WILL NOT OCCUR

  Conditions to Avoid - N.A. ______________________________________________________________________________

SECTION VI - HEALTH HAZARD DATA

_______________________________________________________________________________

  Routes of entry:

  Inhalation  - YES         Skin  - YES             Ingestion  - YES

  Health Hazards-Acute: CAUSES EYE AND SKIN IRRITATION, DRYNESS               

               CHRONIC: MAY CAUSE HEADACHE, DIZZINESS OR SENSITIZE SKIN        

    Carcinogenicity: NO                                                         

    NTP - N.A.       IARC Monographs - N.A.       OSHA Regulated - NO  

  Signs and Symptoms of Exposure  - REDNESS, IRRITATION OF EYES, SKIN, MUCOUS

                                     MEMBRANES, DIZZINESS                      

  Medical Conditions Aggravated  - SENSITIZED SKIN  

Emergency and First Aid Procedures - WASH CONTACT AREAS WITH PLENTY OF WATER, INGESTION: GIVE MILK, WATER OR CITRUS JUICE, INDUCE VOMITING WITH OIL OF IPECAC. CALL PHYSICIAN IMMEDIATELY, PROVIDE FRESH AIR         

_______________________________________________________________________________

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

_______________________________________________________________________________

Steps to be Taken in Case Material is Released or Spilled -

ABSORB WITH RAGS, CLAY OR PAPER, COLLECT MATERIAL INTO PLASTIC CONTAINER. WATER RINSE  RESIDUES AND SMALL AMOUNTS. (BIODEGRADABLE).  Waste Disposal Method  - USE SANITARY LANDFILL DISPOSAL FOLLOW STATE AND LOCAL REGULATIONS (RCRA; SUBTITLE D)         

Precautions to be Taken in Handling and Storage - STORE AT ROOM TEMPERATURE, DO NOT MIX WITH OTHER CHEMICALS.  AVOID PROLONGED CONTACT. KEEP FROM FREEZING.                    

Other Precautions   -   KEEP OUT OF REACH OF CHILDREN ! ______________________________________________________________________________

SECTION VIII - CONTROL MEASURES

_______________________________________________________________________________

Respiratory Protection - NOT REQUIRED WITH NORMAL USE                       

                            IN WELL VENTILATED AREA                            

  Ventilation: Local Exhaust - N.A.                                          

                 Mechanical    - RECOMMENDED                                    

                 Special       - N.A.                                          

                 Other         - ASSURE FRESH AIR CIRCULATION.                 

 Protective Gloves   - REQUIRED: RUBBER, PLASTIC                              

 Eye Protection      - RECOMMENDED: SAFETY GLASSES                            

 Other Protection    - N.A.                                                   

 Work/Hygienic Practices - DO NOT EAT,  DRINK NEXT TO MATERIAL.              

                             WASH HANDS/FACE AFTER WORK. _______________________________________________________________________________

SECTION IX - TRANSPORTATION                 49 CFR

_______________________________________________________________________________

 Unit Cont. -   5,1 GAL. PLASTIC CONT.             Report Qty. (Lbs) -  NA.  

 OSHA -  CLASS II COMBUSTIBLE LIQUID                Labels  -  NO.          

 DOT  -  COMBUSTIBLE LIQUID EXEMPT PER 49 CFR 173.150(F)            

 UN   -  COMBUSTIBLE LIQUID, NOT REGULATED                          

          ______________________________________________________________________________

Vendor assumes no responsibility for injury to vendee or third person proximity caused problems if reasonable safety procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for injury to vendee or third persons proximately caused by abnormal use of the material even if reasonable safety procedures are followed. Further more, vendee assumes the risk in use of the material.