VPI's micro ground edges provide a near seamless appearance and unlike typical imports (and most US made) ESD Tiles that are loaded with reconstituted, cheap limestone based recycled clay fillers, VPI esd vinyl tiles have one of the highest static load limits in the industry! VPI's encapsulated conductive elements (distributed evenly throughout the tiles) provide exceptional electrical consistency and thorough-tile-to-ground charge decay. Available in multiple designer colors offering the flexibility to meet your design criteria while providing outstanding protection and conformance to the most stringent of specifications including ANSI ESD 20.20-2007! VPI esd tile isn't dependent on external anti-stats, ESD floor finish or ambient humidity to maintain it's exceptional conductivity and it won't flake and crumble like other esd tiles*. VPI esd tile features a lifetime warranty on electrical conductivity and are made in the USA!

Shine, Versatility, Performance - Synonymous with VPI

Coming Soon: Bend strength testing results with photo's showing flaking and crumbling that can be expected with many major esd tiles.

This easy to use adhesive features the ultimate in electrically consistent conductivity with excellent bond strength. Cleans easily with soap and water. No more time consuming mixing (as is required with those nasty epoxy based adhesives, no more problem causing variables and no more staining problems either)!

Our new US2004R Releasable Adhesive. makes replacement or removal of the tiles a snap. This adhesive maintains permanent tack, is conductive, water based, low voc and works great for raised panel access!

Electrical Resistance to Ground: Per EOS/ESD S7.1.
1.0E04 to 9.8E05 @ 10VDC

Static Decay: Federal Test Method 101C, method 4046TW101B at 15% relative humidity.
<0.01 sec

Static Propensity: AATCC-134,Conditions: 68 deg, RH @ 40%, Underlayment, earth grounded metal plate, Soles Neolite XS 664 with static dissipative polyurethane heel grounders.
step <15V +, scuff <20V+

New slabs cure very slowly and will generally require a minimum of at least 90 days (4" slab over vapor barrier). Many slabs (depending on environmental conditions and water of convenience used in mixture) will take much longer to cure to the recommended < 5 lbs moisture emission level required prior to installation of your new ESD flooring. The curing times of the slab can be greatly hastened via the addition of the new "super plasticizers to concrete mixture. These plasticizers don't change slump etc yet typically provide a 50% increase in curing time allowing installation or your ESD flooring in as little as 45 days.