Section 1: Product Identification
• Product
Trade Name (s):C2k4, C2004, CompuRelease, Adhere MC
• Chemical Family: Water Based Adhesive.
Section 2. Hazardous Ingredients and Exposure Limits
Chemical Name CAS Number %by weight ACGIH TLV OSHA PEL
None
Section 3. Hazards Identification
• Primary routes of entry: Eyes
• Medical conditions aggravated by exposure: None known
• Potential health effects:
• Eye contact: May cause slight irritation.
• Skin contact: No known effect.
• Ingestion: Not likely to occur
• Inhalation: No effect known
• Chronic: None Known
• Carcinogenicity: This product contains no ingredients listed as a carcinogen by IARC, NTP or OSHA
Section 4. First Aid Measures
• Eye Contact: Flush with water for 15 minutes. Contact a physician if irritation occurs.
• Skin Contact: Wash with soap and water.
• Ingestion: Induce vomiting, contact a physician.
Section 5. Fire Fighting Measures
• Flash point: (o)None
• Lower Flammable Limit: None
• Upper Flammable Limit: None
• Fire-Fighting Instructions: Use protective clothing and self contained breathing apparatus.
• Extinguishing Media: Water fog, CO2, dry chemical and chemical foam.
• Decomposition Products: Dried material may produce CO, CO2, H2O, NXO, and other hydrocarbons. See Section II.
Section 6. Accidental Release Measures
• Steps to be taken if material is released or spilled: Dispense sand, sawdust or vermiculite. Collect and place in waste
container. Wash area thoroughly with water.
Section 7. Handling and Storage
• Handling: Use good hygienic practices. Wash hands before eating, using washroom or smoking. Keep out of the reach of
children.
• Storage: Store above 40o F.
Section 8. Exposure Control / Personal Protection
• Personal Protective Equipment:
• Eye Face Protection: Wear splash goggles if contact with material is likely.
• Skin Protection: Wear gloves and goggles if contact with material is likely.
• Respiratory Protection: Not normally required with good ventilation.
• Engineering Controls: Normal room ventilation.
Section 9. Physical and Chemical Properties
• Boiling Point (oF): 212
• Specific Gravity (water=1): 1.1
• Vapor Pressure: Same as water
• Vapor Density (air=1): Same as water.
• % Volatile by weight: 43
• pH: 8.2
• Appearance and odor: Gray paste with little or no odor and with black and brown colored fibers.
• Grams VOC / Liter of coating: 0 (based on no solvent).
• Grams VOC / Liter of material: 0 (based on no solvent).
Section 10. Stability and Reactivity
• Chemical Stability: Stable.
• Polymerization: Will not occur.
• Conditions to avoid: None known.
• Hazardous Decomposition of Product: None
Section 11. Toxicological Information
This product has been tested for toxicity (acute inhalation; acute dermal; skin irritation; oral) and has been found to be non-toxic as defined by the Federal Hazardous Substance Act, 16 CFR 1500.3.
Section 12. Ecological Information
No information available
Section 13: Disposal Considerations
Disposed of in accordance with Federal, State and Local regulations.
Section 14: Transport Information
For domestic transportation purposes this product is NOT designated as a hazardous material by the U.S. Department of Transportation.
Section 15. Regulatory Information
• TSCA: All ingredients are listed.
• SARA Title III:
• Section 311 and 312 Health and Physical Hazards:\
• Immediate Delayed Fire Pressure Reactivity
• [X] [ ] [ ] [ ] [ ]
Section 16. Other Information
• HIMIS Ratings: Health = 1 Flammability = 1
• Reactivity = 0 Personal Protective Equipment = B
• Hazard rating scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe
• This product is not Photochemically Reactive as defined by California Rule 102
United Static Control Products believes the statements, technical information and recommendations contained herein are reliable. They are given without warranty or guarantee of any kind, expressed or implied.