|
A unique,
highly wear resistant, static control floor finish specially
formulated to STOP those nagging ZAP's
while providing the high luster and low maintenance expected from a
professional grade floor finish No need for "special"
application procedures, DiamondShield's superior metal cross linked, urethane
enhanced polymers will impress the most discriminating floor care
professionals.
Expect
the best at a competitive price (about the same as non-static control
finish)!
DiamondShield's excellent leveling
and low sudsing properties allow for easy application (even when applied in thin coats) and will
dry quickly to a beautiful mirror gloss. DiamondShield's extended durability
and resistance to powdering reduces the necessity for costly stripping,
accepting recoats while providing excellent gloss with no reduction to it's
exceptional static control properties.
|
|
How
is static generated in my environment?
Tribocharging (contact and separation) between non conductive floor finish and insulative shoes
(tennis shoes for example) can generate a static potential far exceeding
5000 volts. Tribocharging can also be generated by
the contact and separation of nylon wheels (rolling carts) over standard
floor finishes. The problem is exasperated in dry winter months allowing
your floor to accumulate dust and your clients to experience static shocks
when touching metal racking, cooler doors, virtually any grounded metal
object. . |
The
Stops Here!
- NO "special" application procedures!
- Eliminates
static discharges
- Reduces
dust and the need to continually dust mop
- Exceptional
wear resistance
- Non
yellowing
- Extremely
easy application
- Competitively
priced
|
|
APPLICATION
& MAINTENANCE
Best results are
obtained when the finish is applied to surfaces that are 60o F or warmer. Remove old finish or wax with a high
quality finish stripper. Mop up or vacuum the stripping solution and rinse
the floor thoroughly with clean water. Optimum appearance and gloss is
obtained with five coats of finish. Apply thin even coats, allowing the
finish to dry for approximately 30-45 minutes, depending on humidity and
temperature, between coats.
Recoating
existing finish:
Wash the floor with a neutral cleaner and allow it to dry. Apply thin even
coats, allowing the finish to dry for approximately 30-45 minutes.
Routine
maintenance program: Floor surfaces should be swept with a clean daily
to remove abrasive loose dirt and sand. Damp mop floors with neutral
cleaner daily to remove soil, salt, and film deposits that can degrade a
coating's gloss. Floors may be high speed burnished to restore the gloss
and extend the time between
SAFETY
INFORMATION
Health
1
Flammability
0
Reactivity
0
Personal Protection
B |
SPECIFICATIONS
Nonvolatile
Solids
19 + 0.6%
Total Active
25%
pH
8.2 - 9.0
Gloss
600 89
@ 5 coats
Color
Translucent White
Weight Per Gallon
8.55
Slip Resistance (ASTM)
0.5 min.
Stability
1 year min.
at room temperature
Freeze/Thaw Stability
3 cycles
Drying Time
30-45 min.
Water Resistance
Excellent
Gallon
Coverage (Feet2)
2000 + 10%
Durability
(ASTM D-968)
3,680 grams
This material is
not a hazardous mixture as defined in 29 CFR 1919, 1200 and M.G.L. c.
111F.
Safety glasses and gloves should be worn during application and
handling.
If ingested, drink milk, water, or fruit juice and induce vomiting
with oil of ipecac.
In the event of eye contact, flush area with water for 15 minutes. Consult with a physician. For detailed information,
consult MSDS sheet. |
