|
Your ESD floor
works hard and deserves the best, after all the cleanliness of your floor
(and facility) is a direct reflection of your attention to manufacturing
cleanliness as well as your Company. United ESD manufacturers a full
range of static control floor care chemicals providing exceptional results
even in the most demanding of
environments. Designed to meet the requirements of true floor care
professional while working in combination with your existing floors
conductivity, these solutions offer the flexibility, performance
and value your floor deserves.
- Protect your flooring and
investment
- Maintain / improve ESD
conductivity
- Improve anti-scuff
performance
- Provide optimum clean high
tech appearance
- Reduce maintenance cost.
- Dramatically extend the
floors life cycle
- Provide optimum clean high
tech appearance.
|
ElectraShine
Ultimate shine, enhances esd conductive properties
Ultimate shine, and
enhancement of ESD conductive properties of ElectraGlaze
This
innovative static control spray buff is formulated as a companion
product for ElectraGlaze floor finishes but works
great with virtually any esd floor "wax.". Easy to use,
ElectraShine extends the static control
floor finish properties while restoring and enhancing the gloss
desirable in many of today's high tech environments. ElectraShine
is ideal for use with either propane or electric high speed polishing
equipment (1200 rpm or higher) providing coolant properties that
help reduce heat related stress of the esd flooring substrate /
adhesive.
-
1 gallon: PN E-Shine 1,
$26.50 ea, weight 10 lbs
-
1 case (4x1gallon
containers) PN: E-Shine 4, $100.25, weight 40 lbs
-
5 gallon pail: PN
E-Shine5, $125.05, weight 45 lbs.
MSDS SHEET
ElectraStrip ESD Floor Finish Stripper and Cleaner
ElectraStrip
rapidly dissolves multiple layers of ESD floor finish, allowing in
some applications for removal without the use of floor machines or
stripping pads. Formulated almost completely from top quality water
miscible solvents, ElectraStrip contains less than 1% solids at
concentration, so it leaves no alkaline residue to adversely effect
subsequent finish applications. Routine stripping of three to five
layers of ESD finish may be accomplished with nothing more than a
mop and wet vacuum. ElectraStrip is designed for the removal of
heavy build-ups of today's UHS, urethane fortified and metal cross
linked ESD floor finishes. Years of buildup can be quickly and
easily removed by light agitation with a scrubbing machine and
standard stripping pad. ElectraStrip will even dissolve the almost
impossible to remove straight acrylic sealers. Formulated for floor
care professionals whose time is at a premium.
Product Data:
Formulation: Water miscible solvents,
amine complexes,
alcohol ethoxylates
pH: 12-12.5
Free Ammonia, none
Free Alkali, 0.5%
Free Acid, none
Phosphates, none
Abrasives, none
Color, light yellow
Odor, moderate
Solubility in water, 100%
Shelf life, 18 mos min
Flash point, > 200 F.
Biodegradable, YES
Typical Coverage
/ Dilution:
1
gallon to 8 gallons of water, typical coverage 250 SF per gallon
of diluted product
-
1 gallon: PN; E-Strip1, $20.50 ea
-
1 case (4 x 1 gallon
containers), PN; E-Strip 4, $76.50 ea, weight 40 lbs
-
5 gallon pail: PN;
E-Strip5, $95.00 ea, weight 46 lbs
MSDS SHEET
ElectraClean
Floor Cleaner / Neutralizer and Restorer
ElectraClean:
A gentle yet effective cleaner specifically formulated for use
on any type of ESD flooring or Coatings.
ElectraClean works GREAT on ESD epoxy, vinyl, esd
waxes and paints. Regular cleaners and detergent compounds
leave harmful insulative residues reducing the static-control
properties of your highly specialized flooring, Not SO with
ElectraClean! ElectraClean works great in both power scrub AND mop on
applications, removing dirt and soil while maintaining or
increasing the conductivity of your critical esd flooring
substrate. Coverage: Various; depends on dilution. For
detailed information please visit:
ElectraClean ESD Floor Cleaner.
-
1
gallon: PN E-Clean1, $22.50, weight 10 lbs
-
1 case (4x1gallon
containers) PN: E-Clean4, $84.75, weight 40 lbs
-
5 gallon pail: PN:
E-Clean5, $104.00 ea, weight 45 lbs
-
ElectraClean is
typically diluted 8 to 16 oz to 1 gallon of water.
-
Why pay for water
(unless it's from Fiji;)
MSDS SHEET
ElectraGlaze ESD Floor Finish
ElectraGlaze ESD Floor finish is an
exceptional, long lasting high conductivity acrylic floor dressing formulated for use on esd
solid vinyl flooring (up to 2 thin coats), esd epoxy (2 thin
coats) and standard solid vinyl
flooring substrates (up to 4 coats). It is a high
gloss, slip resistant and environmentally friendly.
ElectraGlaze is easily
cleaned with ElectraClean neutral cleaner without loss of
gloss or reduction of it's superb static control
properties. For complete information please visit:
ElectraGlaze for
ESD Floors
Product
Data:
% solids:
>20%, ASTM D2834-34
pH: 7.25,
ASTM E70-77
Gloss: 88
min, ASTM D1455-82
Recoatability:
Excellent, ASTM D3153-78
Rubber Heel
Marks: 1.0, ASTM D1436-82/
Resistance:
Excellent CSMA # 9-73
Powdering
Resistance: Excellent, ASTM D2048-82
Freeze / Thaw
Stability: Passes 3 Cycles, ASTM D3209-82
Static
coefficient of friction: >0.55, ASTM D2047-82
Slip
Resistance per NFSI test method 101-A: 0.7 neolite, 0.8
rubber
Shelf Life: 2 years,
Flash Point: non
Coverage:1,500 to
2000 sf per gallon per coat.
Ordering Info
1 Gallon, PN: E-Glaze 01
Price: $58.89, Shipping Weight: 10 lbs
1 case, (4 X1 gallon containers), PN: E-Glaze 04
Price $233.92, Shipping Weight: 38 lbs
1 ea 5 Gallon Pail, PN: E-Glaze 05
Price: $281.05, Shipping Weight: 45 pounds
MSDS SHEET
|
